Differences

This shows you the differences between two versions of the page.

--- boiler:metallurgy:hoop_stresses [2020/04/23 13:34] – fornax
+++ boiler:metallurgy:hoop_stresses [2020/05/11 19:27] (current) – fornax
@@ Line 1: / Line 1: @@
-====== Hoop Stresses in boiler tube ======
+====== Tensile Stresses in a boiler tube ======
-For tube or cylinders where **wall thickness is more than 1/20 of diameter**.
+These formulas are for a tube or cylinder where **wall thickness is more than 1/20 of diameter**. For a thick wall tube, scroll to the bottom of this page.
+{{ boiler:metallurgy:tube_stresses.png}}
 ===== Stress in Axial Direction =====
@@ Line 42: / Line 44: @@
 Combined stress in a single point in the cylinder wall cannot be described by a single vector using vector addition. Instead stress tensors (matrixes) describing the linear connection between two physical vectors quantities can be used.
+Reference: [[https://www.engineeringtoolbox.com/stress-thick-walled-tube-d_949.html|Link]]
 ====== Hoop Stresses in a thin walled tube or Cylinder ======